You’ve heard of the Bro Code and seen all the different Bro Tips, right? Well, OCC is abiding by the Pro Code and we’d like to share some of our Protips™ that everyone in the structured cabling business should know about!

You’ve heard of the Bro Code and seen all the different Bro Tips, right? Well, OCC is abiding by the Pro Code and we’d like to share some of our Protips™ that everyone in the structured cabling business should know about!

With the exceedingly prevalent use of data, the growth of wireless access points, IP-enabled devices and building automation systems has jumped exponentially.  Cameras and other security equipment are now being connected to the network as these devices move from analog to digital or Ethernet based.

This growth has created a need to change the way typical horizontal links and channels are configured for these applications. Devices such as wireless access points mounted in non-traditional locations (in the ceiling or high up on the wall) are not attached to the network using standard faceplate, jack and patch cord configurations.  The traditional method is being replaced with direct attachment where the horizontal cable is terminated with a field installable plug and then plugged directly into the equipment.

Currently, installers in the field are utilizing modular plugs that are intended for patch cord construction to terminate Cat5e and Cat6 horizontal cabling. This practice is difficult, time consuming, yields unpredictable performance results and is not recommended by the Telecommunications Industry Association (TIA) 568 standards. Also, these plugs do not accommodate the larger conductors utilized in Cat6A cabling. The increasing data rates of wireless access points and other devices now require a Cat6A cabling link to support 10G Ethernet.

While the TIA-568 communications cabling standard does not currently support direct attach links, the growing demand for field installable plugs has many industry standards such as TIA-862-A, Building Automation Systems Cabling Standard looking to recognize the direct attach method of termination.   However, the need for a robust, easy to install field terminable plug for this market segment that provides true performance is imperative.

OCC has addressed this need with the introduction of a Category 6A Field Terminable Plug.   With OCC’s new plug, terminations are simple and require no specialized tools.  They support high-performance 10 Gigabit networks and meet the TIA-568-C.2 Category 6A component performance requirements.  In addition, they are supported by OCC’s 25-year MDIS Direct Attach System Performance Warranty when used as an end-to-end OCC copper cabling solution.

For more information about OCC’s Field Terminable Plug, click on the links below:

• Product Information

You’ve heard of the Bro Code and seen all the different Bro Tips, right?  Well, OCC is abiding by the Pro Code and we’d like to share some of our  Protips™ that everyone in the structured cabling business should know about!

You’ve heard of the Bro Code and seen all the different Bro Tips, right?  Well, OCC is abiding by the Pro Code and we’d like to share some of our  Protips™ that everyone in the structured cabling business should know about!

You’ve heard of the Bro Code and seen all the different Bro Tips, right?  Well, OCC is abiding by the Pro Code and we’d like to start sharing some of our  Protips™ that everyone in the structured cabling business should know about! 

As network infrastructures grow to encompass increased building automation, IP devices, and wireless access points, the need for communications components that meet these demands also grows. OCC’s Cat 6A Shielded Solution can provide 10-Gig performance and mitigate the EMI issues that come with running large amounts of cables for higher bandwidth applications. Our high performance cabling and connectivity products ensure the data within the cable will be protected from EMI, resulting in higher speeds and better data transmission.

Features & Benefits:

• OCC Cat 6A shielded jacks, patch panels, UFTP cable, and shielded cable assemblies provide a tuned system that guarantees ISO and TIA Category 6A compliance
• OCC’s new shielded modular jack with tool-less design is easy to terminate and provides reliable field terminations
• OCC shielded Cat 6A patch panels are an all-steel construction that ensures panel rigidity and offer high density configurations
• OCC UFTP Cat 6A cable offers individual shielding for all four twisted pairs ensuring EMI and RF mitigation with guaranteed 10GBASE-T performance
• OCC K6AS jacks and patch panels combined with OCC Cat6A U/FTP copper cabling and Cat 6A shielded patch cords form an end-to-end Cat 6A channel backed by OCC’s 25-year MDIS system performance warranty.