Products
Products
Products
Products
Products

Slimline Riser Indoor/Outdoor PLTC Hybrid Powered Fiber Cables

Installation zone RECOMMENDATION
1
1
1
1

These small diameter hybrid powered fiber cables are thinner, lighter, and more flexible than other hybrid cables on the market. Perfect for remotely powered Passive Optical LAN installations, security cameras, and wireless access points, the Slimline Hybrid Powered Fiber Cable offers the convenience of remote power and the data rates of fiber optics all in one cable that can be installed indoors, outdoors, and in cable trays.

Remote Power Distance Calculator

(Based upon input variables below, this calculator will calculate distance for 12-22AWG conductors)

All calculations from this calculator are estimates intended for planning purposes only.

Applications

  • Specifically designed for indoor/outdoor installations that utilize a centralized power supply to remote power and devices, thus eliminating the need to provide local AC power to each location.
  • Two copper wires provide power from a centralized power supply to end devices while fiber optic elements provide bi-directional data paths through the cable.
  • Hybrid fiber/copper cables are designed for use in wet locations on Class 3 power-limited circuits and Power Limited Tray Cable(PLTC_ circuits as described in Article 725 of the National Electrical Code.
  • Allows remote power over distances greater than the 100m limitation of traditional Power Over Ethernet (PoE)

Features

  • Various combinations of copper conductors and optical fibers in a single hybrid cable.
  • Riser-rated construction is also PLTC rated, perfect for use in offices and industrial settings.
  • PLTC rating allows the cable to be installed in cable trays
  • 12, 14, 16, 18, 20, or 22 AWG wires available. Class-3 power limited, 300V rated wire insulation.
  • Cables made with OCC's single-mode or multimode fiber types.
  • Choice of 900μm buffered fibers or 900μm buffered fibers inside 2.0mm sub-units. The sub-units contain aramid yarn for a more robust strain relief when terminating the fiber into a connector and provide added protection in outdoor applications.
  • Ultra-Fox™ tight buffered fiber.
  • Indoor/Outdoor Slimline is also available with Interlocking Aluminum Armor (ILA). ILA versions of the cable maintain the Riser and PLTC ratings.

Characteristics

Characteristic MECHANICAL AND ENVIRONMENTAL CHARACTERISTICS
Operating Temp -40°C to +85°C
Storage Temp -40° to +85°C
Crush Resist 1800 N/cm
Impact Resist 2000 Impacts

Specifications

Slimline-Riser Indoor/Outdoor PLTC (900µm Buffered Fiber)

Tensile Load Minimum Bend Radius
Fiber Count Part Number Spec Sheet Diameter mm
(in)
Weight kg/km
(lbs/1,000ft)
Installation N
(lbs)
Operation N
(lbs)
Installation cm
(in)
Longer Term cm
(in)
 
1 Fiber + 2x12 AWG CA003DPF*9*R Download Spec Sheet 9.1
(0.36)
116.0
(78.0)
707
(159)
212
(48)
18.2
(7.2)
9.1
(3.6)
1 Fiber + 2x14 AWG CA003DPE*9*R Download Spec Sheet 8.1
(0.32)
87.0
(58.0)
507
(114)
152
(34)
16.2
(6.4)
8.1
(3.2)
1 Fiber + 2x16 AWG CA003DPD*9*R Download Spec Sheet 7.2
(0.28)
64.0
(43.0)
355
(80)
107
(24)
14.4
(5.7)
7.2
(2.8)
1 Fiber + 2x18 AWG CA003DPC*9*R Download Spec Sheet 6.7
(0.26)
51.0
(34.0)
321
(72)
96
(22)
13.4
(5.3)
6.7
(2.6)
1 Fiber + 2x20 AWG CA003DPB*9*R Download Spec Sheet 6.5
(0.26)
47.0
(32.0)
316
(71)
95
(21)
13.0
(5.1)
6.5
(2.6)
1 Fiber + 2x22 AWG CA003DPA*9*R Download Spec Sheet 6.1
(0.24)
40.0
(27.0)
316
(71)
95
(21)
12.2
(4.8)
6.1
(2.4)
2 Fibers + 2x12 AWG CA004DPF*9*R Download Spec Sheet 9.1
(0.36)
116.0
(78.0)
707
(159)
212
(48)
18.2
(7.2)
9.1
(3.6)
2 Fibers + 2x14 AWG CA004DPE*9*R Download Spec Sheet 8.1
(0.32)
87.0
(58.0)
507
(114)
152
(34)
16.2
(6.4)
8.1
(3.2)
2 Fibers + 2x16 AWG CA004DPD*9*R Download Spec Sheet 7.2
(0.28)
64.0
(43.0)
355
(80)
107
(24)
14.4
(5.7)
7.2
(2.8)
2 Fibers + 2x18 AWG CA004DPC*9*R Download Spec Sheet 6.7
(0.26)
51.0
(34.0)
321
(72)
96
(22)
13.4
(5.3)
6.7
(2.6)
2 Fibers + 2x20 AWG CA004DPB*9*R Download Spec Sheet 6.5
(0.26)
47.0
(32.0)
316
(71)
95
(21)
13.0
(5.1)
6.5
(2.6)
2 Fibers + 2x22 AWG CA004DPA*9*R Download Spec Sheet 6.1
(0.24)
40.0
(27.0)
316
(71)
95
(21)
12.2
(4.8)
6.1
(2.4)

Slimline-Riser Indoor/Outdoor PLTC (2.0mm Sub-Units)

Tensile Load Minimum Bend Radius
Fiber Count Part Number Spec Sheet Diameter mm
(in)
Weight kg/km
(lbs/1,000ft)
Installation N
(lbs)
Operation N
(lbs)
Installation cm
(in)
Longer Term cm
(in)
 
1 Fiber + 2x12 AWG CE003DPF*9*R Download Spec Sheet 9.3
(0.37)
121.0
(81.0)
715
(161)
215
(48)
18.6
(7.3)
9.3
(3.7)
1 Fiber + 2x14 AWG CE003DPE*9*R Download Spec Sheet 8.5
(0.33)
92.0
(62.0)
514
(116)
154
(35)
17.0
(6.7)
8.5
(3.3)
1 Fiber + 2x16 AWG CE003DPD*9*R Download Spec Sheet 7.8
(0.31)
71.0
(48.0)
363
(82)
109
(24)
15.6
(6.1)
7.8
(3.1)
1 Fiber + 2x18 AWG CE003DPC*9*R Download Spec Sheet 7.4
(0.29)
58.0
(39.0)
329
(74)
99
(22)
14.8
(5.8)
7.4
(2.9)
1 Fiber + 2x20 AWG CE003DPB*9*R Download Spec Sheet 7.3
(0.29)
55.0
(37.0)
324
(73)
97
(22)
14.6
(5.7)
7.3
(2.9)
1 Fiber + 2x22 AWG CE003DPA*9*R Download Spec Sheet 7.1
(0.28)
49.0
(33.0)
324
(73)
97
(22)
14.2
(5.6)
7.1
(2.8)
2 Fibers + 2x12 AWG CE004DPF*9*R Download Spec Sheet 9.3
(0.37)
121.0
(81.0)
715
(161)
215
(48)
18.6
(7.3)
9.3
(3.7)
2 Fibers + 2x14 AWG CE004DPE*9*R Download Spec Sheet 8.5
(0.33)
92.0
(62.0)
514
(116)
154
(35)
17.0
(6.7)
8.5
(3.3)
2 Fibers + 2x16 AWG CE004DPD*9*R Download Spec Sheet 7.8
(0.31)
71.0
(48.0)
363
(82)
109
(24)
15.6
(6.1)
7.8
(3.1)
2 Fibers + 2x18 AWG CE004DPC*9*R Download Spec Sheet 7.4
(0.29)
58.0
(39.0)
329
(74)
99
(22)
14.8
(5.8)
7.4
(2.9)
2 Fibers + 2x20 AWG CE004DPB*9*R Download Spec Sheet 7.3
(0.29)
55.0
(37.0)
324
(73)
97
(22)
14.6
(5.7)
7.3
(2.9)
2 Fibers + 2x22 AWG CE004DPA*9*R Download Spec Sheet 7.1
(0.28)
49.0
(33.0)
324
(73)
97
(22)
14.2
(5.6)
7.1
(2.8)

Instruction Sheets

img
Talk to a knowledgeable OCC Expert that can find or customize a product to fit your specifications. 800-622-7711