Search
B-Series Breakout – Riser Rated Tray Cables
Installation zone RECOMMENDATION1
1
1
1
- Ideal for installations requiring an extremely rugged and reliable cable design where maximum mechanical and environmental protection are necessary
- Typical industrial uses are factory automation, power generation and other utilities, oil and gas refining, and surface mining
- Easiest cable to install where direct termination of the subcable to a connector and a direct run to panels and equipment are desired
- Ideal for locations requiring low-temperature performance along with a flame rating
Features
- Fiber Optic tray Cable: Suitable for use in cable trays
- Individual fibers and strength members protected in a subcable configuration
- Most rugged cable design with individual subcables for routing to diverse intelligent devices with direct connector termination at each device
- Meets all applicable standards for Impact & Crush Resistance (CSA C22.2 No. 230)
- Fibers may be directly terminated at factory devices or central locations using connectors with no further protection required
- J-Jacket is UV, fungus and moisture resistant
- Designed for indoor/outdoor installations, including cable trays
- 2 to 72 fiber counts are available with 2.0mm or 2.5mm subcables
- Low-temperature PVC outer jacket (J-Jacket) provides excellent performance and flexibility at low temperatures
- Wide operating temperature range of -50°C to +75°C
- Core-locked® jacket prevents cable from flattening and the jacket from wrinkling in tight bends:
- Permits pulling with direct attachment of wire mesh grip; not need to access inner aramid strength members
- Improved crush and tear resistance
- Contains 25% more material than conventional jackets
- High crush and tensile load ratings compared to similar tray service fiber optic cables
- Oil resistant for use in industrial applications (J-Jacket)
- UL listed in accordance with NEC section 770.179(b) for use in vertical runs in building riser shafts or from floor to floor
- Designed to exceed the flammability requirements of Chapter 8 of IEEE 383
Characteristics
| Characteristic | PVC Outer Jacket | Low-Temperature PVC Outer Jacket | Indoor/Outdoor Zero Halogen Outer Jacket |
|---|---|---|---|
| Operating Temp | -40°C to +85°C | -50°C to +75°C | -40°C to +70°C |
| Storage Temp | -55°C to +85°C | -55°C to +85°C | -40°C to +85°C |
| Install Temp | -10°C to +60°C | -30°C to +60°C | -20°C to +60°C |
| Flame Retardancy | UL listed type OFNR (UL 1666) and FT4 (CSA C22.2 No. 232) | UL listed type OFNR (UL 1666) and FT4 (CSA C22.2 No. 232) | UL listed type OFNR (UL 1666) and FT4 (CSA C22.2 No. 232) |
| Crush Resist | 2200 N/cm | 2200 N/cm | 2200 N/cm |
| Impact Resist | 1500 impacts | 1500 impacts | 1500 impacts |
| Flex Resist | 2000 cycles | 2000 cycles | 2000 cycles |
| Jacket Type | D | J | Z |
* 2.0mm Subcables = BE; 2.5mm Subcables = BX
Standards
OCC Indoor/Outdoor tight-buffered fiber optic cables meet the functional requirements of the following standards:
- UL 1666
- CSA C22.2 No. 232
- CSA C22.2 No. 230
- GR-409-CORE
- ICEA-S-104-696
- ICEA-S-83-596
- TIA-568
- TIA-598
Specifications
with 2.5mm subcables
| Tensile Load | Minimum Bend Radius | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Fiber Count | Part Number | Spec Sheet | Diameter mm (in) |
Weight kg/km (lbs/1,000ft) |
Installation N (lbs) |
Operation N (lbs) |
Installation cm (in) |
Longer Term cm (in) |
|
| 2 | BX002J***9KR | Download Spec Sheet |
7.0 (0.28) |
41.0 (28.0) |
1,200 (270) |
500 (110) |
10.5 (4.1) |
7.0 (2.8) |
|
| 4 | BX004J***9KR | Download Spec Sheet |
8.3 (0.33) |
68.0 (46.0) |
2,000 (450) |
800 (180) |
12.5 (4.9) |
8.3 (3.3) |
|
| 6 | BX006J***9KR | Download Spec Sheet |
9.6 (0.38) |
88.0 (59.0) |
3,000 (670) |
1,200 (270) |
14.4 (5.7) |
9.6 (3.8) |
|
| 8 | BX008J***9KR | Download Spec Sheet |
11.6 (0.46) |
133.0 (89.0) |
4,000 (900) |
1,700 (380) |
17.4 (6.9) |
11.6 (4.6) |
|
| 12 | BX012J***9KR | Download Spec Sheet |
14.1 (0.56) |
159.0 (107.0) |
6,000 (1,350) |
2,500 (560) |
21.2 (8.3) |
14.1 (5.6) |
|
| 18 | BX018J***9KR | Download Spec Sheet |
15.3 (0.60) |
226.0 (152.0) |
8,000 (1,800) |
3,500 (790) |
23.0 (9.1) |
15.3 (6.0) |
|
| 24 | BX024J***9KR | Download Spec Sheet |
17.6 (0.69) |
292.0 (196.0) |
10,000 (2,250) |
3,800 (850) |
26.4 (10.4) |
17.6 (6.9) |
|
| 36 | BX036J***9KR | Download Spec Sheet |
20.9 (0.82) |
375.0 (252.0) |
14,000 (3,150) |
6,000 (1,350) |
31.4 (12.4) |
20.9 (8.2) |
|
| 48 | BX048J***9KR | Download Spec Sheet |
24.2 (0.95) |
501.0 (336.0) |
18,000 (4,050) |
7,500 (1,690) |
36.3 (14.3) |
24.2 (9.5) |
|
| 60 | BX060J***9KR | Download Spec Sheet |
26.4 (1.04) |
604.0 (406.0) |
22,000 (4,950) |
8,800 (1,980) |
39.6 (15.6) |
26.4 (10.4) |
|
| 72 | BX072J***9KR | Download Spec Sheet |
28.9 (1.14) |
768.0 (516.0) |
26,000 (5,845) |
11,000 (2,470) |
43.4 (17.1) |
28.9 (11.4) |
|
with 2.0mm subcables
| Tensile Load | Minimum Bend Radius | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Fiber Count | Part Number | Spec Sheet | Diameter mm (in) |
Weight kg/km (lbs/1,000ft) |
Installation N (lbs) |
Operation N (lbs) |
Installation cm (in) |
Longer Term cm (in) |
|
| 2 | BE002J***9KR | Download Spec Sheet |
6.0 (0.24) |
40.0 (27.0) |
800 (180) |
200 (40) |
9.0 (3.5) |
6.0 (2.4) |
|
| 4 | BE004J***9KR | Download Spec Sheet |
6.9 (0.27) |
52.0 (35.0) |
1,600 (360) |
400 (90) |
10.4 (4.1) |
6.9 (2.7) |
|
| 6 | BE006J***9KR | Download Spec Sheet |
8.1 (0.32) |
67.0 (45.0) |
2,400 (560) |
600 (130) |
12.2 (4.8) |
8.1 (3.2) |
|
| 8 | BE008J***9KR | Download Spec Sheet |
9.4 (0.37) |
88.0 (59.0) |
3,200 (720) |
800 (180) |
14.1 (5.6) |
9.4 (3.7) |
|
| 12 | BE012J***9KR | Download Spec Sheet |
10.9 (0.43) |
108.0 (73.0) |
4,800 (1,000) |
1,200 (270) |
16.4 (6.5) |
10.9 (4.3) |
|
| 18 | BE018J***9KR | Download Spec Sheet |
12.6 (0.50) |
156.0 (105.0) |
6,000 (1,350) |
1,500 (340) |
18.9 (7.4) |
12.6 (5.0) |
|
| 24 | BE024J***9KR | Download Spec Sheet |
14.7 (0.58) |
218.0 (146.0) |
7,200 (1,600) |
1,800 (400) |
22.1 (8.7) |
14.7 (5.8) |
|
| 36 | BE036J***9KR | Download Spec Sheet |
16.8 (0.66) |
266.0 (179.0) |
9,600 (2,100) |
2,400 (540) |
25.2 (9.9) |
16.8 (6.6) |
|
| 48 | BE048J***9KR | Download Spec Sheet |
20.1 (0.79) |
387.0 (260.0) |
12,000 (2,700) |
3,000 (680) |
30.1 (11.9) |
20.1 (7.9) |
|
| 60 | BE060J***9KR | Download Spec Sheet |
16.8 (0.66) |
299.0 (201.0) |
15,000 (3,400) |
3,750 (850) |
25.2 (9.9) |
16.8 (6.6) |
|
| 72 | BE072J***9KR | Download Spec Sheet |
26.0 (1.02) |
652.0 (438.0) |
16,800 (3,800) |
4,200 (900) |
39.0 (15.4) |
26.0 (10.2) |
|
Instruction Sheets
Related Documents
- Fiber Optic Tray Cable Brochure
- Industrial Solutions Quick Reference Product Guide
- Laser Ultra-Fox Fiber Performance Chart
Please Login Here to access additional documents.
More Industrial Cables
Connections you can count on.
