R-JACK® Industrial RJ45 Solution

Harsh Environment Connectors

Home / Products / Copper / R-JACK® Industrial RJ45 Solution

Installation zone RECOMMENDATION

The R-JACK® Ethernet Connector provides an efficient, comprehensive and affordable solution for Ethernet connectivity in harsh and environmentally challenging applications. Unlike low quality plastic RJ45 receptacles, R-JACK is designed to ensure guaranteed performance and durability even in the harshest conditions. In addition, R-JACK provides a variety of options, including pre-kitted solutions that are designed to integrate seamlessly with industrial and hardened environment applications.

Applications

10/100/1000BASE-T Ethernet
POE, POE+, and POE++
DATA, VOiP, and IPTV in Harsh Environments
Radar Systems
Industrial Process Control
Mobile Equipment Transit Cases
Data Acquisition and Control
Shelters
Battlefield Communication Systems

Features

Compact design that delivers optimum protection. R-JACK jam nut (ECRK) and flange mount (ECRD) type receptacles provide higher panel density than current MIL-DTL-38999 style products. For customers wanting to upgrade to R-JACK, a MIL-DTL-38999/24 shell size 19 style jam nut receptacle (ECRJ) is available to fit existing panel cutouts. A common cable strain relief for plugs and receptacles accommodates both small and large cable diameters, complete with compressive fittings for shielded cable. R-JACK receptacles offer a 100% transversely sealed (IP-68) configuration option, preventing dust, water or moisture penetration, with or without dust cap or plug engagement.
Designed for integration. R-JACK is designed to work with jam nut, flange mount, in-line receptacle and plug options. OCC also offers completed R-JACK harness assemblies for drop-in-place applications. Pre-kitted solutions, including gaskets, O-rings, mounting brackets, and hardware, make it easier for customers to procure, install and integrate these components.
Comprehensive shielding performance. R-JACK plugs, receptacles, and backshells are designed to establish grounding between shielded cord sets, as well as between cord set and chassis ground. When immunity to electromagnetic interference is critical, the R-JACK's EMC/EMI shielding capabilities also provide exceptional protection.

Standards

Specification	Parameter	Range
Insertion Loss	IEEE 802.3	LX 1000 BASE-T, NXT, FXT
Temperature Cycling	EIA-364-32, 25 Cycles	' -45°C to +100°C
Temperature Shock 5 Cycles	EIA-364-32,	-40°C to +100°C
Humidity Resistance	EIA-364-31,	21 Days 43°C, 98% Humidity
Water Submersion ,	IP-68,IEC-60529	1M Depth, 48 Hours
Dust Test	IP-68, IEC-60529	20mBARS Air Pressure, 8 Hours
Mechanical Shock,	EIA-364-27B 100G	6ms, Half Sine, 6 directions
Vibration , 4 Hours Per Axis,	EIA-364-28	Test Condition IV, 12 Hours Total
Matting Durability	EIA-364-09	500 Mate / Demate Cycles
Flammability	Per UL94	Compliant to V0, V1, 10 sec. each
Salt Spray	EIA-364-26	500 Hours
Shell-To-Shell Conductivity,(ZiNi Plating Only)	EIA-364-83	1V @ 1.5VDC, 100 Hours
Electromagnetic Shielding Effectiveness	IEEE-STD-299	20kHz, 150kHz, 14MHZ, 600MHz, 1GHz, 2GHz, 8GHz, 10GHz, VERT. & HORZ.,
Hi-Pot High Voltage Test	EN61010-1	600VAC-60Hz, 900uA, Ramp=10sec., (8 channels)

Specifications

		Download Drawing(s)
Part Number	Description	PDF	DWG/ZIP
		n/a	n/a

Please contact OCC for additional information: Toll Free: 877-509-1500, Direct: +1-972-509-1500 or Email: info@occfiber.com.

NOTE:
a. EMC configurations include ECRA, ECRD, ECRE, ECRG, ECRH, ECRJ, ECRK; Dust Caps, Backshells plated with Zinc Nickel
b. Use 1 for A or U Configuration types